• System Features

    • 7" Touch Screen TFT display
    • Connect up to 16 sample points
    • 4-20mA Analog Outputs
    • 5 Volt free relay outputs, expandable to 72
    • Visual indication of gas levels, status and location
    • Interface with other devices, names and units are programmable
    • Remote reset / isolate with expansion
    • 8 GB SD Card for data-logging & floor plans
    • Wall or 19” rack mount enclosures
    • IP 65 rating
    • Ir bench or EC, PID cells

  • System Features

    • EN 60079 II 2 G D Ex-d IIC T6
    • Standalone gas detector
    • Incorporates infra-red, electro-chemical, catalytic and PID sensor technologies
    • Visual indication of gas levels
    • 1.7" full colour TFT display
    • Network up to 500 gas sensors
    • U-processor based functionality
    • RS 485 Modbus RTU
    • 4-20mA outputs
    • 3 x Volt free contacts
    • Alarm levels freely programmable
    • Internal fault monitoring
    • Stainless steel sensor housing
    • Non-intrusive one person calibration
    • Easy to use step by step menu
    • Minimal training required
    • Remotely mount sensors
    • Programmable alarm delay
    • Password protected
    • Supplied pre-configured

  • System Features

    • EN 60079 II 2 G Ex-d IIC T6\
    • 1.7" LCD display
    • Remotely mount gas sensor
    • Incorporates electro-chemical sensor
    • Visual indication of gas levels
    • U-processor based functionality
    • Internal fault monitoring
    • Stainless steel or plastic sensor
    • housing
    • Calibrate milli-amp signal.
    • View zero & span values.
    • Automatic calibration function
    • Industrial standard 24v 4-20mA
    • 2 wire signal

    • Bespoke Graphics Displays
    • 10" up to 75" Screens.
    • View exact locations and readings in seconds
    • Ideal for emergency response teams
    • Allows multiple area displays with automatic or manual selection
    • Numerous control panels can be connected to a single screen
    • Combine detectors and control panels in one system
    • Wall or desktop mounted
    • Remote dial-in viewing

  • There are 5 types of expansion modules • 8 Way Analog Universal Inputs • 8 Way Analog Universal Outputs • 16 Relay Outputs 4*4, 3A @ 250Vac • 6 Relay Outputs 5A @ 250Vac • Gateway Modbus TCP Ethernet 2 Year Guarantee
    All Helio products can communicate with each other allowing a wide range of installations suiting most requirements with a single solution. Non Helio products can be added to the network including temperature, pressure, radiation ,existing detectors or any device that provides an output. Intuitive menus and on screen help text ensure ease of use and minimal training. Add relays, analogue inputs and outputs with expansion modules as required.
  • Helio MAP-250P with Gas Proving Control Panel

    System Features

    • Robust, rugged design
    • 4.3" TFT touch-screen display
    • Connect up to 250 gas detectors
    • Connect 8* 4-20mA gas detectors
    • Visual indication of gas levels
    • 8 volt free relay outputs
    • Freely programmable
    • Isolate individual detectors
    • Relay output simulation
    • Text descriptions programmable
    • Internal fault monitoring
    • Programmable alarm setpoints
    • Event log feature
    • Remote reset / isolate
    • Operate via internet / network
    • RS485 Modbus interface
    • IP 65 rating

  • Features

    • Connect up to 50 gas detectors/devices
    • E-Stop, Thermal Links & Fire Alarm Inputs
    • Visual indication of gas levels
    • 4 * 4-20mA Devices
    • 4.3" Full-Colour display
    • Remote Detector Calibration
    • Alarm history with Date/Timestamp
    • RS485 Modbus RTU
    • 4 x Volt free contacts. 10A @ 230Vac
    • Controlled mains supply to gas valve
    • Alarm levels freely programmable
    • Internal fault monitoring
    • Easy to use Step by step menu
    • Minimal training required
    • Programmable alarm delay
    • Password protected
    • Supplied pre-configured
       
  • Discover Safety beyond limits with our

    Helio Map-500 19'' Rack Mounted Panel

    • Mitigate Risks - Robust, effective, reliable protection
    • Save money - our Helio Map-500 control panel software seamlessly manages all detector functionalities.
    • Contribute to Net-Zero goals by significantly reducing energy consumption compared to a standard control panel
    • Save time with our Pre-Configured solution, designed for greater installation efficiency
    • User-friendly with a step-by-step intuitive interface
    • Stability allows for increased maintenance intervals.
    The standalone detector incorporates a vibrant display, internal relays and RS485 communication. The software provides control over all makes of detectors on a network Achieve Compliance and Worker Protection with our Helio Gas Detection systems, by continuously monitoring gas levels and triggering timely alarms to potential hazards, preventing accidents and exposure to toxic gases.
    • 7.0" Touch Screen TFT display.
    • Connect up to 500 gas sensors.
    • Up to 64 analogue Inputs with expansion Up to 64 analogue Outputs with expansion 8 Volt free relay outputs, expandable to 72 Visual indication of gas levels, status and location.
    • Interface with other devices, names and units are programmable.
    • Remote reset / isolate.
    • 8 GB SD Card for data-logging & floor plans.
    • Wall or 19” rack mount enclosures.
    • IP 65 rating.
     
  • System Features

    • 7.0" Touch Screen TFT display.
    • Connect up to 500 gas sensors.
    • Up to 64 analogue Inputs with expansion
    • Up to 64 analogue Outputs with expansion
    • 8 Volt free relay outputs, expandable to 72
    • Visual indication of gas levels, status and location.
    • Interface with other devices, names and units are programmable.
    • Remote reset / isolate.
    • 8 GB SD Card for data-logging & floor plans.
    • Wall or 19” rack mount enclosures. IP 65 rating.

  • System Features

    • Mount anywhere within the network
    • Visual indication of gas levels
    • 1.7" Full-Colour display
    • Network up to 500 gas sensors
    • U-processor based functionality
    • RS-485 Communication
    • Internal fault monitoring
    • Set time remotely from the MAP Panel.
    • Automatically detects other networked devices
    • Powered from network
    • Display 5 detectors at once

  • System Features

    • EN 60079 II 2 G D Ex-d IIC T6
    • Standalone gas detector
    • Incorporates infra-red, electro-chemical, catalytic and PID sensor technologies
    • Visual indication of gas levels
    • LCD display
    • Network up to 500 gas sensors
    • U-processor based functionality
    • RS 485 Interface
    • 4-20mA output
    • Internal fault monitoring
    • Stainless steel sensor housing
    • Non-intrusive one person calibration
    • Easy to use step by step menu
    • Remotely mount sensors
    • Password protected
    • Supplied pre-configured
  • System Features

    • RS-485 and 2/3 wire 4-20mA interface
    • 2x8 character LCD display
    • Network up to 500 gas sensors
    • U-processor based functionality
    • Alarm levels freely programmable
    • Incorporates Infra-red, electro-chemical, catalytic and PID sensor technologies
    • Visual indication of gas levels
    • Remotely mount gas sensor
    • Internal fault monitoring
    • Stainless steel sensor option
    • Non-intrusive one-person calibration
    • Easy to use step by step menu

Title

Go to Top